. If it does not appear, ensure you are using a direct USB port rather than a hub. 4. Basic Operation

To set up the Graphtec Craft Robo CC330-20 on a Mac, you must use specific legacy software. Because this is an older model, modern macOS versions (11.0 and later) may require a virtual machine or a dedicated legacy Mac. Apple Support Community 1. Identify Your macOS Version macOS 10.13 to 14.0 (Sonoma): You should use Graphtec Studio 2 for Mac macOS 10.6 to 10.14 (Mojave): Use the original Graphtec Studio Older Mac OS X (pre-10.6):

Graphtec typically bundles the driver within its design software for Mac. Download the Software: Graphtec Software Download page and select Graphtec Studio 2 Graphtec Studio depending on your OS. Mount the Disk Image: Open the downloaded file and drag the Graphtec Studio icon into your Applications Permissions (macOS 10.14+): If prompted, go to System Settings > Security & Privacy > Privacy > Automation

You will likely need the original ROBO Master software from the installation CD. 2. Install Drivers and Software

and ensure the software has permission to control your system. 3. Connect the Cutter Connect the CC330-20 to your Mac using a Power on the device. System Settings > Printers & Scanners (or Print & Scan).

button. The Mac should recognize the device as "Graphtec CC330". Select it and click

Graphtec Craft Robo Cc330 20 Driver For Mac Apr 2026

. If it does not appear, ensure you are using a direct USB port rather than a hub. 4. Basic Operation

To set up the Graphtec Craft Robo CC330-20 on a Mac, you must use specific legacy software. Because this is an older model, modern macOS versions (11.0 and later) may require a virtual machine or a dedicated legacy Mac. Apple Support Community 1. Identify Your macOS Version macOS 10.13 to 14.0 (Sonoma): You should use Graphtec Studio 2 for Mac macOS 10.6 to 10.14 (Mojave): Use the original Graphtec Studio Older Mac OS X (pre-10.6): Graphtec Craft Robo Cc330 20 Driver For Mac

Graphtec typically bundles the driver within its design software for Mac. Download the Software: Graphtec Software Download page and select Graphtec Studio 2 Graphtec Studio depending on your OS. Mount the Disk Image: Open the downloaded file and drag the Graphtec Studio icon into your Applications Permissions (macOS 10.14+): If prompted, go to System Settings > Security & Privacy > Privacy > Automation Basic Operation To set up the Graphtec Craft

You will likely need the original ROBO Master software from the installation CD. 2. Install Drivers and Software Identify Your macOS Version macOS 10

and ensure the software has permission to control your system. 3. Connect the Cutter Connect the CC330-20 to your Mac using a Power on the device. System Settings > Printers & Scanners (or Print & Scan).

button. The Mac should recognize the device as "Graphtec CC330". Select it and click