Power Engineering 3b1 Exam Questions ⚡

( Q_2 = 50 \times \frac12001450 = 41.38 \ \textm³/s ) ( P_2 = 2.5 \times \left(\frac12001450\right)^2 = 2.5 \times 0.684 = 1.71 \ \textkPa ) Question 7 – Materials (Creep) At what temperature range does creep become a design concern for carbon steel in boiler service? A) 150°C – 200°C B) 350°C – 400°C C) 425°C – 550°C D) > 600°C

| Topic | Approx. % | |-------|-----------| | Boiler design, types, and construction | 20% | | Boiler fittings and accessories | 15% | | Combustion and fuel systems | 15% | | Thermodynamics (steam properties, cycles) | 15% | | Materials and welding | 10% | | Water treatment | 10% | | Draft systems and fans | 8% | | Safety and ASME/CSA codes | 7% | Question 1 – Boiler Design (Metallurgy) A firetube boiler shell is subject to internal pressure. The maximum allowable stress for the shell material at 200°C is 120 MPa. The shell inside diameter is 1.5 m, and the required thickness is 18 mm. Calculate the maximum allowable working pressure (MAWP) using the thin-shell formula for a cylinder. power engineering 3b1 exam questions

( \frac1U_o = \frac150 + \frac0.083 \times 0.1022×45 + \frac0.0831500 × 0.075 ) ( = 0.02 + \frac0.00846690 + \frac0.083112.5 ) ( = 0.02 + 0.000094 + 0.000738 ) ( = 0.020832 ) ( Q_2 = 50 \times \frac12001450 = 41

A) ASME Section I – Power Boilers Question 3 – Combustion (Efficiency) A natural gas boiler operates with 15% excess air. The flue gas O₂ reading is 3.2%. Is this consistent? Show why or why not. The maximum allowable stress for the shell material

B) Prevent caustic gouging and acid phosphate corrosion Question 6 – Draft Systems (Fan Laws) A forced draft fan delivers 50 m³/s at 2.5 kPa static pressure and 1450 RPM. If the speed is reduced to 1200 RPM, what is the new flow and pressure? Fan laws: ( Q_2 = Q_1 \times \fracN_2N_1 ) ( P_2 = P_1 \times \left(\fracN_2N_1\right)^2 )